Table of Contents
Advertisement
Operation
Selecting the play mode (PURE DIRECT)
This mode reproduces the sound with extremely high quality. The
audio signals do not pass through the tone circuits, etc., and the
display that could affect the audio signals are turned "OFF".
< PURE DIRECT >
Press
.
Setting the tone control
¢ Adjusting the tone
1
< TONE CONTROL >
Press
to select "BASS" or
"TREBLE".
2
< SELECT >
Use
to set the level.
Can be adjusted within the range of –10 dB to +10 dB.
¢ When you do not want to adjust the tone
< TONE DEFEAT >
Press
to select "TONE DEFEAT ON".
¢ When listening with the volume turned low
< LOUDNESS >
Press
to select "LOUDNESS ON".
Adjusting the speaker volume
1
< CH VOL >
Press
to select the speaker.
The settable speaker switches each time this button is pressed.
< SELECT >
2
Use
to adjust the volume.
Can be adjusted within the range of –12 dB to +12 dB.
Combining the currently playing sound with the
desired image (VIDEO SELECT function)
1
MENU
Press
for at least 2 seconds.
2
< SELECT >
[F F G G ]
Use
or press
until the desired image
appears on the display.
To cancel, press [F F G G ] to select "SOURCE".
3
ENTER
Press
.
• The video source selected with the video select function is
stored in the memory for the different input sources.
Listening to the radio
Auto preset memory
This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the preset memory.
1
< ON/STANDBY >
Press
and
700AE/700AEDAB's power to the standby mode.
2
< ON/STANDBY >
PRESET •
Hold
and press
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is
completed.
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the station,
then preset it using the manual "Preset memory" operation.
• To interrupt this function, press < ON/STANDBY > .
12
ENGLISH
¢ Default settings
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
A1 ~ A8
90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz, 90.1 /
B1 ~ B8
90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
Auto tuning
1
< FUNCTION >
Use
[TUNER]
.
2
BAND
Press
set
the
DRA-
3
< MODE >
Press
• The "AUTO" indicator lights.
.
4
< TUNING >
Press
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
ENGLISH
Operation
Auto tuner presets
to select "TUNER" or press
to select "AM" or "FM".
to set the auto tuning mode.
.
- Quick Links:
- Getting Started
- Connections
- Specifications
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DRA-700AE and is the answer not in the manual?